JAZZ L 5AX

JAZZ L 5AX


Working center 5 ax with tilting rotary table and fixed table
 
The Universal working centre JAZZL 5AX, was created to satisfy any kind of need for high dynamic and remarkably complex process.
The base frame is made through DMP process specifically developed for milling machine. It is a damping-vibration composite material, a high performance mineral casting.
The machine is built on a structural base where there are the two main working supports, one being the fixed table and the second being the tilting rotary table (axis C + B).
The X axis is assembled on a carriage that is moved by a screw assembling on linear rails; on this carriage the Y axis RAM is mounted. The movement of this is by the same system, ball screw and linear rails.
The spindle (opt. electro spindle) is fastened in a structure that is fixed frontally to the RAM onto the carriages of a third set of linear rails and again moved by a ball screw (Z axis).
There is no balance cylinder fitted in order to guarantee high dynamic machine speed.
Safety levels are guaranteed by an integral safety brake with the screw axis.
The tool magazine is fixed on the base in standard version with ISO40 or in version BT- 40 (optional) or in the version HSK-63 (optional).
The working area of the machine is enclosed as standard via vertical protective bellows.
The new JAZZL 5AX has a longer dimension in order to install a bigger fixed table, of 1250X600 mm instead of 800 x 600 mm (referred to the model Jazz 5AX). This new configuration is the consequent development of Jazz, and it has been projected with two sliding doors instead of one, with the opportunity to work in pendular (opt), increasing the flexibility of the machine.
As additional option, removable sub table is available to be assembled on fixed table.
It allows to set up a tailstock to machine shafts, fixed on the rotary table in vertical position (90°)
MAIN FEATURES
High flexibility;
40 positions tool magazine (STD) or 60 positions tool magazine (OPT) with fast change;
Frontal protection with double wall for the X and Y axes protection;
Simplicity in the construction and for intervention;
Chip conveyor;
Ability to hold large work piece on a small machine via the fixed and rotary tables.
Opportunity for pendular workings (OPT)

CNC takım tezgahları konusunda uzman kadro ve tecrübemizle müşterilerimize hizmet vermekteyiz. Bize Ulaşın