M25LP

M25LP


Seibu successfully developed the world's first CNC Wire Electrical Discharge Machine (W-EDM) in 1972.
Then, released new model MA series of higher-productivity, higher-precision wire EDM, and MMA and SuperMMA series with further improved static accuracy.
In 2013, we released a long-waited oil-type (oil-working fluid) wire EDM [M25LP] developed based on a lot of experience and skills. 
It works effectively for high precision machining of Tungsten Carbide compared to machining by the use of water-working fluid.
Therefore, [M25LP] will meet narrow pitch connector and LED parts in micro-fabrication using φ0.05 wire as well as the motor core mold of hybrid car for which we can expect demand increase from now.

X-Y same stroke, insulated quadrilateral table

X-Y same stroke suitable for the mold of motor core.
Stable machining is achieved with high rigidity quadrilateral table.
Floating capacitance can be reduced to the limit by ceramic insulation, which makes the energy during machining stable.

Equipped with new type SF-7 (super finishing unit)

Developed new model SF-7 for oil-type wire EDM.
Achieved best surface roughness 0.2μmRz. (for Tungsten Carbide)

Stable pitch accuracy

Traditional "Scraping" technique has achieved the pitch accuracy ±1μm.

Auto wire feeding device

Excellent feeding success rate for φ0.05 wire

M25LP

MAKS. İŞLENEBİLİR PARÇA BOYUTU 270x270x100mm
MAKS. İŞLENEBİLİR PARÇA AĞIRLIĞI 150kg
EKSEN HAREKET MESAFELERİ X / Y / Z 250x250x200mm
KABLO ÇAPI φ0.05~φ0.20mm(OP:φ0.05)
OTOMATİK KABLO BESLEME AWF-4 Equipped as standard
U-V EKSEN HAREKETİ ±35x±35mm
MAKS. KONİKLİK AÇISI ±10°
(100mm work thickness)
MAKİNE BOYUTLARI 1,770x2,040x2,018mm
MAKİNE AĞIRLIĞI 3,100kg

 

CNC takım tezgahları konusunda uzman kadro ve tecrübemizle müşterilerimize hizmet vermekteyiz. Bize Ulaşın